The Norman Lamps LED-GU7-12V4W-3 is a 4W LED MR16 lamp engineered as a direct retrofit for GU7 turn-and-lock base fixtures operating on 12V low-voltage systems. Designed and produced exclusively by NLI-USA, this LED MR16 delivers 300 lumens of warm white light at 3000K, providing a focused, inviting glow that is well-suited to accent, display, track, and recessed lighting environments where the original halogen lamp's warmth is desired.

This LED MR16 replaces 35W to 50W GU7-base halogen lamps, including the FMW-GU7 and EXN-GU7, while consuming only 4W of power — a significant reduction in energy draw compared to the halogens it supersedes. The 38-degree flood beam spread distributes light evenly over a wide area, making it equally effective for retail display cases, hospitality settings, residential recessed cans, and architectural accent fixtures.

The GU7 turn-and-lock base — distinguishing it from the more common GU5.3 bi-pin style — installs with a simple insert-and-twist motion into compatible 12V GU7 sockets. At 2.00 inches in diameter and 1.75 inches in length, this LED MR16 maintains the standard MR16 form factor for a straightforward, no-modification replacement. The lamp is rated for 15,000 average life hours, representing a substantial service life advantage over the 5,000-hour rating typical of the halogen lamps it replaces.

This LED MR16 lamp is not dimmable and requires a compatible 12V low-voltage transformer or driver. It carries CE and RoHS certifications, confirming compliance with European safety and environmental standards. Available individually or in a full case of 10 units.

Another exclusive designed & produced LED bulb from NLI-USA

• 4W LED MR16 replaces 35-50W GU7-base halogen lamps (FMW-GU7, EXN-GU7) — runs on 12V low voltage with a GU7 turn-and-lock base
• 300lm warm white output at 3000K with a 38-degree flood beam spread — ideal for track, recessed, display, and accent lighting
• 15,000 average life hours — up to 3x longer service life than the 5,000-hour halogen lamps it replaces
• Compact MR16 form factor: 2.00 in. diameter x 1.75 in. length — direct drop-in fit for existing GU7 fixtures, no modification required
• CE and RoHS certified; not dimmable — requires a compatible 12V transformer or driver
• Exclusively designed and produced by NLI-USA; available by the single piece or in a full case of 10

Tags: 12 volts, LED MR16, 3000K, GU7, EXN-GU7, FMW-GU7, LED-GU7-12V4W-3